home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 25
/
Cream of the Crop 25.iso
/
comm
/
pca32_75.zip
/
PCA32_75.EXE
/
readme.txt
< prev
next >
Wrap
Text File
|
1996-11-02
|
28KB
|
784 lines
pcANYWHERE32 for Windows 95 and Windows NT Version 7.5
Copyright 1996 Symantec Corp. All Rights Reserved. October, 1996
======================================================================
Thank you for choosing pcANYWHERE32
If you experience problems with pcANYWHERE32, please check the manual
and this document for any information that may pertain to your problem.
If this information does not help, you can call Symantec Technical
Support at (541) 465-8430. We also provide a support Bulletin Board at
(541) 484-6669. Compuserve subscribers can contact Symantec Technical
Support in the Symantec forum (GO SYMANTEC). America Online
subscribers can also contact Techinical Support. If connected to a
Newsserver, you can connect to service.symantec.com.
======================================================================
This file includes additions and changes to the printed manual. It
also includes important upgrade, trouble-shooting and compatibility
information.
Please read this information before using pcANYWHERE.
======================================================================
IMPORTANT TCP/IP UPDATE
======================================================================
The TCP/IP ports assigned to pcANYWHERE hosts are now registered with
the Internet Assigned Numbers Authority.
To provide backward compatibility with previous, non-registered TCP/IP
connections, the following files are provided:
TCPPORT1.REG - Allows access to hosts with registered TCP/IP ports
TCPPORT2.REG - Allows access to hosts with older, non-registered ports
Simply locate these items in the pcANYWHERE install directory and
double-click the item to change the current port configuration.
(To upgrade previous pcANYWHERE products to utilize registered TCP/IP
port numbers, contact either the Symantec BBS or Compuserve Symantec
forum for an upgrade patch.)
======================================================================
30-DAY TRIAL VERSION OVERVIEW
======================================================================
* The 30-day trail version will allow potential customers to test
drive a fully functional version of pcANYWHERE32, with the following
enhancements/constraints:
* The user will not be able to re-install on the same machine (PC)
after the 30-day time-out. The disks may be used on a different
PC, however.
* On startup, a dialog box will indicate the number of days until
expiration. The user must press "I Agree" button in order to run
the product.
* During the last five (5) days of the trail period an additional
dialog will remind the user of expiration and also offer purchase
information.
* In addition, to the above dialog boxes, the "About Box" of
pcANYWHERE32 30-day version, will indicate the number of days left
in the trial period.
* This 30-day version will not allow for an administrator install.
If you run setup /A it will display a message saying that it is
not supported for evaluation.
======================================================================
INSTALLATION
======================================================================
NETWORK INSTALLATIONS
* Administrators creating a pcANYWHERE32 NT workstation installation
from a network drive need to alter the "Add Be A Host" template
before workstation users begin to create Host session items. The
default template setting "Run as a Service" should be unchecked if
Host items files are stored on the network. Host files stored on a
network drives will not launch if "Run as a Service" is checked.
* Do not restrict access to the pcANYWHERE installation directory by
setting callers' security privileges to "No Access". Callers must be
given read-access to these files.
* In order to access Administrator options, a workstation install must
be performed on the Administrator's machine. If the /A option is
invoked without first installing a workstation, you will not be
prompted for an Administrator password.
* If Host or caller files are located on a network drive, you will not
have access to the "Launch Host at startup" feature.
WINDOWS NT
----------
* Because Windows NT allows varying access to protected files and
services, installing and uninstalling pcANYWHERE32 should be
performed by a user with Administrator privileges.
* Windows NT 3.51 with Service Pack #4
To properly install pcANYWHERE32, use the following steps:
(Note: MS Service packs later than #4 are available and require
no additional setup)
1. In the SYSTEM32 sub-folder of your Windows NT folder, rename
SMSS.EXE to SMSS.OLD.
2. Copy SMSS.EXE located on "pcANYWHERE32 Disk 1" to the SYSTEM32
sub-folder.
3. Restart Windows NT.
4. Run pcANYWHERE32 Setup program.
For more information, contact Microsoft Windows NT product support
or look for article #Q148485 at http://www.Microsoft.com/kb.
* For Windows NT system reliability, it is recommended that program
files not be deleted manually. Instead, an uninstall program is
provided for this purpose.
======================================================================
COMPATIBILITY
======================================================================
OLDER VERSIONS OF pcANYWHERE
----------------------------
* pcANYWHERE 2.0x TCP/IP Hosts can be made visible to a pcANYWHERE32
Remote browse list in two different ways:
1. Specify the Host IP explicitly on the Remote TCP/IP browse list,
located under Application Options, or
2. Enhance the older pcANYWHERE 2.0 Host with a file (AWCMTCP.DLL),
available on the Symantec BBS or Symantec forum on CompuServe.
* Simultaneous File Transfer and Remote Control is only supported
between pcANYWHERE 7.5 or later Hosts and Remotes.
* If you experience slow performance when connected to a pcANYWHERE
7.5 Host with an older version of pcANYWHERE (5.0 for DOS or 2.0 for
Windows) try turning off the Remote's cache file.
* Executing an AutoXfer(tm) procedure with a previous version of
pcANYWHERE will "End session when finished" even when this feature
is not enabled.
* pcANYWHERE Access Server
To perform file transfers when connecting to a pcANYWHERE Access
Server Host, click "Remote Control" and start the file transfer
after the connection has been made.
* Configuration Conversion
When converting pcANYWHERE configuration files under Windows NT,
please note that all newly created session items with IPX as the
connection type will be changed to SPX.
The master password from a previous installation of pcANYWHERE 2.0x
should be disabled before converting files.
Data files configured as "Shared" under a previous Administrator
installation of pcANYWHERE cannot be converted to pcANYWHERE32.
WINDOWS NT
----------
* When connecting to a pcANYWHERE32 Host under NT, the Host user must
already be logged-in before a successful AutoXfer can take place.
* Owners of previous versions of pcANYWHERE may now take advantage of
the pcANYWHERE32 feature "Send CTRL-ALT-DEL". Pressing CTRL-ALT-D
while connected to a pcANYWHERE32 Host will emulate this feature.
* For optimal performance under Windows NT 3.51, it is recommended
that pcANYWHERE32 NT Hosts are configured to "Run as a Service".
* Those who see a performance decrease when opening a DOS window on a
pcANYWHERE32 NT 3.51 Host can improve the speed by altering NT
tasking, located under System in the Control Panel. The default
setting should be changed from "Best Foreground Application Response
Time", to "Foreground and Background tasks equally responsive".
Under Microsoft NT 4.0, go to the control panel, click "System",
click the "Performance" tab and mode the slider bar all the way to
the LEFT. Foreground and background tasks are now equally responsive.
* If you have problems with your remote keyboard (such as non-ALT keys
selecting menus) when connected to a pcANYWHERE32 NT Host, try
individually pressing the ESC, Shift, ALT, or CTRL keys.
* You may experience difficulty changing desktop resolution and color
depth under Windows NT 4.0 in certain conditions such as installing
new video card hardware or changing between VGA (safe mode) and
back again.
To resolve this problem:
1. Uninstall pcANYWHERE32
2. Within the NT Control Panel, change to the proper resolution
3. Reinstall pcANYWHERE32
* When connected to a pcANYWHERE32 host under Windows NT 4.0, the use
of non-standard cursors may cause unpredictable results.
* If you are using a pcANYWHERE DOS 5.x remote to connect to an NT 4.0
host and encounter video problems, set the host video mode selection
to run in "Compatibility" mode.
WINDOWS 95
----------
On Windows 95 remotes only, when selecting CTRL+ALT+DEL in session,
the CTRL and ALT key are left in the depressed state on the host. In
session, it appears as if the keyboard is locked. To correct this,
the key may be toggled again on the remote or the focus can be
changed to the remote desktop and back to the pcANYWHERE terminal
window.
WINDOWS 95J
----------
* NEC PC98 users - If your ALT key (GRPH) locks in session, contact NEC
or your computer distributor for the keyboard driver upgrade, with
the filename KBD98UPD.EXE.
WINDOWS NT3.51J
---------------
* NEC PC98 users - Please avoid switching to full-screen DOS mode on
the host while connected with pcANYWHERE32, or unpredictable results
may occur. If poor video is received in this mode, press the
<GRPH-ENTER> keys to return to a windowed DOS mode.
NOVELL NETWARE
--------------
* Multiple sessions using IPX connections are not currently supported
under Microsoft Windows 95.
* Windows NT
To enable Remote File Transfer support with NetWare volumes, your
Novell NetWare password should be the same as your Windows NT
password.
pcANYWHERE32 SPX Host lists are supported under Windows NT only if
Novell Netware client for Windows NT is installed.
SPX Host objects are currently not supported with the Novell NetWare
Client32 for Windows NT installed. This also applies to
pcANYWHERE32 Gateways where SPX is the inbound device type.
MULTIPROCESSOR COMPUTERS
------------------------
pcANYWHERE32 has been tested on the following multiprocessor
computers:
Micron Millennia SMP Power Server (2 processors)
Hewlett Packard Netserver (4 processors)
Hewlett Packard Vectra XU (2 processors)
If you are planning to use pcANYWHERE on another multiprocessor
computer, Symantec recommends that you test pcANYWHERE on that
computer before using it in a production environment.
CAPI
----
AVM/A1 cards running the North American CAPI drivers (Windows 95) do
not support channel bonding. Checking "Attempt Channel Bonding" in
pcANYWHERE32 may produce unpredictable results.
Contact AVM for information on updated drivers.
If you plan to use channel bonding, make sure "attempt channel bonding"
is enabled on the pcANYWHERE32 host.
VIDEO ADAPTERS AND GRAPHICS ACCELERATORS
----------------------------------------
If you experience problems with a 3D graphics accelerator video
adapter, you may need to disable some of the adapter's advanced
accelerator features.
* Testing with the Matrox Millenium indicates that the PowerGDI
Acceleration option should be disabled when the adapter is used
with a pcANYWHERE32 Host.
* Diamond Stealth 2000 3D - If you observe horizontal lines on your
desktop when windows are dragged, contact Diamond
(www.diamondmm.com) for the latest Windows 95 drivers,
version 4.03.00.2101 posted 9/4/96, S3D954-B.exe.
MODEMS
------
* If you experience connection problems using modems under WIN95, try
lowering the default FIFO buffer settings, or changing the default
data rate. These options are found in the modem's Connection
property page, under the headings "Port Settings" and "Maximum
Speed".
* Some modems and direct-connect serial cables do not permit the DSR
(Data Set Ready) signal to be set "high". In these cases, it is
necessary to set a registry entry to ignore the state of the DSR
signal. The key is:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Create a new DWORD entry named SerialIgnoreDSR and set its value to 1.
RUNNING WITH WINDOWS NT RAS
---------------------------
To avoid conflicts with the Remote Access Service and pcANYWHERE modem
hosts, a pcANYWHERE network host should be setup instead. For more
information, refer to the pcANYWHERE manual under "Remote Networking".
SERIAL PORT HARDWARE
--------------------
Many older and low-end PC's use 8250 UART chips for their serial
ports. These chips do not adequately support large amounts of data at
high data rates. To get the best performance from pcANYWHERE and other
communication applications, you should use a serial I/O card with a
16550A UART or similar chip. These are available at many computer
stores.
TCP/IP HOST NAMES
-----------------
When specifying TCP/IP Host names to connect to, lowercase extended
ASCII characters (e.g. "÷") cannot be used, or the name will not
appear on the list of available Hosts.
MICROSOFT QuikRes
-----------------
Changing the pcANYWHERE host desktop resolution or color depth
on-the-fly with the freeware program "QuikRes" may cause the host to
lose desktop optimization or end the connection.
FTP CORP. "ONNET" STACK USERS
-----------------------------
pcANYWHERE users owning FTP Corporations' OnNet Stack do not have
access to the SPX device protocol under pcANYWHERE32.
TCP/IP FIREWALL SECURITY
------------------------
Network administrators may configure their network security to allow
TCP/IP connections over the Internet. pcANYWHERE32 uses two ports,
5631 and 5632, which must be left open by the system administrator
to allow connections through the firewall.
NORTON UTILITIES 2.0
--------------------
Users of Norton System Doctor should disable notification when
operating a pcANYWHERE32 host. When rebooting a host machine remotely,
Norton System Doctor message dialogs may keep the pcANYWHERE host from
resetting properly.
WinFAX AND pcANYWHERE HOSTS
---------------------------
In order for WinFax to give control of an incoming telephone call to a
waiting pcANYWHERE32 Host, the WinFax feature "call discrimination"
must be enabled. For more information, consult your WinFax User
Manual.
If you are using Delrina's Wincomm Suite follow the procedure below:
1. In Winfax, click on "Setup" drop down menu and then click on
"Receive".
2. Enable "Call discrimination"
3. Enable "Automatically answer incoming calls"
4. Click on OK.
If you are using Delrina's Winfax 7.0 standalone, you will need to
modify the Windows Registry. If you do not know how to do this, check
your Windows 95 or Windows NT documentation.
1. Run REGEDIT and edit the key:
HKEY_CURRENT_USER\Software\Delrina\Commsuite\7.0\Modems\Modem#
2. Set "DataCapable" to 1.
3. Set "CallDiscriminationSupport" to one of the values below:
Value Description
1 FAE...ATO (recommended value)
2 FAA...ATO
3 FAE
4 FAA
The following values are NOT supported in the October 31,1995
release of WinFAX but are in later releases:
9 FCLASS=1 FAE...ATO
10 FCLASS=2 FAA...ATO
11 FCLASS=1 FAE
12 FCLASS=2 FAA
4. Close REGEDIT.
5. In Winfax, click on "Setup" drop down menu and then click on
"Receive".
6. Enable "Automatically answer incoming calls".
7. Click on OK.
Check the TELEPHON.INI that is in the WINDOWS directory. Make sure
that the [HandoffPriorities] section is as follows:
[HandoffPriorities]
RequestMakeCall=DIALER.EXE
datamodem=wfxmod32.exe,
unknown=
g3fax=wfxmod32.exe,
Run WinFAX or the Commbar utility. Start the pcANYWHERE32 Host. WinFAX
7.0 will answer the call. If it is a FAX call, WinFAX 7.0 will handle
it. If it is a data call, WinFAX 7.0 will hand the call off to
pcANYWHERE32.
* Note: Certain USRobotics 28.8 modems, with PROM dates predating '96,
do not handle call discrimination properly. Please contact USRobotics
for information on how to obtain the newer chipset.
======================================================================
CORRECTIONS AND ADDITIONS
======================================================================
COMMAND LINE OPTIONS
--------------------
You can now use a command line option to have a pcANYWHERE host call
a remote. At a command prompt, type:
AWHOST32.EXE <hostname>.BHF /c
where hostname represents the pcANYWHERE host to connect with.
* Note to NT users: Windows NT users should precede this host command
line option with '/d'.
CALLER SECURITY OPTIONS
-----------------------
* Under Security Options, the feature "Prompt to confirm connection"
will only function for those callers that are not SuperUsers (that
is, those who have individual caller privileges defined).
SCRIPT LANGUAGE
---------------
* The script command "LOAD CONFIG" is no longer supported. Use the
commands "LOAD ONLSVCINFO" or "LOAD HOSTINFO" instead.
* Scripts may be executed from the command line by using the following
syntax:
AWREM32.EXE <scriptname>
The <scriptname> must include the path, and the extension ".SCR".
OLE
---
* pcANYWHERE Host objects do not support OLE when they are "Run as a
service." Disable this feature when launching Host objects embedded
within other applications or run from the file manager.
* The OLE service must be installed and activated under Windows NT
3.51 before installing pcANYWHERE32.
REMOTE NETWORKING
-----------------
After successfully configuring a Remote Networking item, a
pcANYWHERE32 Remote Control item named "RAS" is created in the Remote
Control window. This item is not to be used for your dial-up
networking connections. Click "Remote Networking" and choose the
appropriate item.
DRIVE SECURITY
--------------
* Drive Security is not supported by pcANYWHERE32 under Windows NT. If
you need security, use an NTFS partition and allocate rights to
users with the Administrative Tools included in NT.
TCP/IP HOST BROWSE LIST
-----------------------
The pcANYWHERE32 TCP/IP driver now supports browsing for Hosts at
connection time. While the default configuration of this feature will
work fine for most users, you may need to make some adjustments on
your system. To do this, you will need to use the Windows Registry
Editor. See your Windows documentation for more information.
The following Registry items affect the ability to browse and connect
to pcANYWHERE32 TCP/IP Hosts:
TCPIPBrowseDelay -
Allows the user to set the delay used when creating the Remote's
browse list. For a RAS connection, start with a setting of 11. If the
complete Host list is not received over a WAN connection, start this
value at 1 and increase until the entire Host list is displayed.
DisplayInHostList -
This item can be altered for pcANYWHERE32 Hosts that do not wish to
appear in a Remote's browse list, when the Remote is scanning the
network. The default for this setting is 1. To keep the Host from
being displayed on a browse list, assign the registry key a value of
zero.
TCPIPConnectIfUnknown -
Use this feature if your Internet service provider filters directed
packets. Test this by specifying a known pcANYWHERE32 Host
in the TCP/IP Host list. If the status remains "unknown", set the
DWORD to a value other than zero. (Connecting to a Host whose status
is known, but is actually busy, will correctly result in a blank
screen).
To add or modify these Registry entries, use the following steps:
1. Run the Registry Editor (REGEDIT.EXE or REGEDT32.EXE)
2. Edit the key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
3. Create or edit the DWORD value with the TCP/IP browse option name.
4. Assign the desired value to the entry.
SCHEDULING AutoXfer(tm)
-----------------------
An AutoXfer can be scheduled to run whenever is convenient for you.
Follow these steps to create an unattended file transfer:
1. Create an AutoXfer procedure for a Remote Control item. See your
manual for a complete description of this process. The procedure
should have the "End session when finished" option selected.
2. Using a scheduling program (for example the Microsoft System Agent
which is part of the Windows 95 Plus! pack, or the Norton Program
Scheduler), schedule the Remote Control item you used in step one.
The item will be a file with the extension .CHF (for example,
DIRECT.CHF). By default, pcANYWHERE creates items in the DATA
folder in the folder pcANYWHERE is installed in (e.g.
C:\Program Files\pcANYWHERE\data).